FLIR Ariel CM-3102 - Figure 51: Network

To Next Page

To Previous Page

Accessing the CM-3102 via a Web Browser

Ariel CM-3102 User and Installation Guide

December 12, 2018

Network

The Network tab includes the following screens:

General

FTP Server

RTSP

SNMP

802.1X

IP Filter

DDNS

LDAP

SSL

6.3.1.4.1 General

The General screen is used for configuring most network settings.

Figure 51: Network > General Screen

To configure basic settings

In the Basic Settings section, do the following:

In the Device Name text box, enter a friendly name for the camera.

In the HTTP Port text box, enter the port number. The range is from 1025 to 65535. The

default port is 80.

From the Enable LDAP drop-down list, select ON or OFF. If you select ON, verify that

the information in Network > LDAP page is correct and that the LDAP server is online.

The default is OFF.

Main Page

Table of Contents5
Document Scope and Purpose9
Introduction16
Features16
Figure 1: CM-3102 Mini-Dome Camera16
Package Contents17
Downloading Product Information from the FLIR Website17
Hardware Description18
CM-3102-01-I Fixed Focal Camera Dimensions18
Figure 2: Fixed Focal Side Dimensions18
Figure 3: Fixed Focal Base Dimensions18
CM-3102-11-I Varifocal Camera Dimensions19
Figure 4: Varifocal Side Dimensions19
Figure 5: Varifocal Base Dimensions19
Figure 6: CM-3102-11-I System Cable20
System Requirements23
Installing and Connecting the Camera25
Pre-Installation Checklist25
Outdoor Mounting Recommendations25
Mounting Instructions26
Figure 7: Drill Template26
Figure 8: Open the Dome Cover26
Figure 9: Dome Ceiling Installation27
Figure 10: Spacer Attached to Camera Base28
Figure 11: Align Spacer28
Powering the Camera29
Figure 12: Power Connection29
Connecting the Camera to the Network30
Configuring the Unit's Initial IP Address30
Figure 13: DNA Discovery Window30
Figure 14: Login Window31
Figure 15: Web Interface31
Figure 16: Download Ariel Player Plug-In Information Bar31
Figure 17: Corrupt/Invalid Signature31
Figure 18: View Downloads Screen32
Figure 19: Run Anyway Option32
Figure 20: Ariel Player Setup Wizard Screen 132
Figure 21: Ariel Player Setup Wizard Screen 233
Figure 22: Ariel Player Setup Wizard Screen 333
Figure 23: Ariel Player Setup Wizard Screen 433
Figure 24: Run Ariel Player Plug-In Information Bar34
Figure 25: Live View Screen (CM-3102-01-I)34
Figure 26: Ariel Player Restart System Dialog Box34
Resetting the Camera35
Figure 27: DNA Assign IP - Use DHCP Screen35
Figure 28: Camera Reset/Microsd Panel35
Accessing the CM-3102 Via a Web Browser39
CM-3102 Web Interface40
CM-3102-01-I Web Interface40
Figure 29: CM-3102-01-I Live View Screen with Callouts40
CM-3102-11-I Web Interface41
Figure 30: CM-3102-11-I Live View Screen with Callouts41
Live View42
Recording42
Capturing a Picture43
Viewing Live Video from a Media Player44
Figure 31: VLC Open Media Screen44
Settings45
System Tab45
Figure 32: Media Player Screen45
Figure 33: Unexpanded Sidebar45
Figure 34: CM-3102-01-I System Menu45
Figure 35: CM-3102-11-I System Menu46
Figure 36: CM-3102-11-I Lens Control Screen46
Figure 37: Date & Time Screen47
Figure 38: NTP Setting Section48
Figure 39: Basic Configuration > Audio Screen48
Figure 40: Firmware Screen49
Figure 41: Rebooting Complete Dialog Box49
Figure 42: Basic Operations Screen50
Figure 43: OSD Location Coordinates52
Figure 44: OSD Screen52
Figure 45: User Accounts-Account Setting Screen53
Figure 46: Default Administrator Access Level Dialog Box54
Figure 47: Add User Dialog Box54
Figure 48: Empty Access Level Dialog Box54
Figure 49: Filled Access Level Dialog Box55
Figure 50: Updated Account Setting List55
Figure 51: Network > General Screen56
Figure 52: Basic Settings Dialog Box57
Figure 53: Upnp User Input Screen58
Figure 54: Network > FTP Screen59
Figure 55: Network > RTSP Screen59
Streaming Tab81
Camera Tab86
Appendix103
Technical Specifications104
Network Settings107
Troubleshooting108
Acronyms and Abbreviations110
Accessories111

FLIR Ariel CM-3102 - Figure 51: Network > General Screen

Table of Contents

Related product manuals