FLIR Ariel CM-3102 - Page 99

Accessing the CM-3102 via a Web Browser
December 12, 2018
Ariel CM-3102 User and Installation Guide
91
Continue to configure the other settings in the Exposure section:
 Shutter Speed – Select the shutter speed from the following options:
Manual
Shutter Speed
Manual
Shutter Speed
PAL
NTSC
PAL
NTSC
1/25
1/30
1/1000
1/1000
1/50
1/60
1/2500
1/2500
1/100
1/120
1/5000
1/5000
1/250
1/250
1/10000
1/10000
1/500
1/500
 Gain – Set the gain between 0-48 dB. Increasing the gain lightens dark pictures resulting from
low-level lighting. The default is 0.
 Digital WDR – See the explanation in the Auto Mode section above.
In the Day/Night Switch Control section, configure the following setting:
 Mode – See the explanation in the Auto Mode section above.
In the IR Control section, configure the following settings:
 Mode – See the explanation in the Auto Mode section above.
 LED Brightness – See the explanation in the Auto Mode section above.
Click Reset if you want to return to factory default settings.
Picture Adjustment
The Picture Adjustment screen enables you to configure picture quality, color and mirror flip settings.
Figure 101: Picture Adjustment Screen
Note:
Settings are saved automatically. Clicking Reset returns the settings to factory defaults.