EasyManuals Logo

FLIR E60 User Manual

FLIR E60
183 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #159 background imageLoading...
Page #159 background image
History of infrared technology
31
When Herschel revealed his discovery, he referred to this new portion of the electromag-
netic spectrum as the ‘thermometrical spectrum’. The radiation itself he sometimes re-
ferred to as ‘dark heat’, or simply ‘the invisible rays’. Ironically, and contrary to popular
opinion, it wasn't Herschel who originated the term ‘infrared’. The word only began to ap-
pear in print around 75 years later, and it is still unclear who should receive credit as the
originator.
Herschel’s use of glass in the prism of his original experiment led to some early contro-
versies with his contemporaries about the actual existence of the infrared wavelengths.
Different investigators, in attempting to confirm his work, used various types of glass in-
discriminately, having different transparencies in the infrared. Through his later experi-
ments, Herschel was aware of the limited transparency of glass to the newly-discovered
thermal radiation, and he was forced to conclude that optics for the infrared would prob-
ably be doomed to the use of reflective elements exclusively (i.e. plane and curved mir-
rors). Fortunately, this proved to be true only until 1830, when the Italian investigator,
Melloni, made his great discovery that naturally occurring rock salt (NaCl) which was
available in large enough natural crystals to be made into lenses and prisms is remark-
ably transparent to the infrared. The result was that rock salt became the principal infra-
red optical material, and remained so for the next hundred years, until the art of synthetic
crystal growing was mastered in the 1930’s.
Figure 31.3 Macedonio Melloni (1798–1854)
Thermometers, as radiation detectors, remained unchallenged until 1829, the year Nobili
invented the thermocouple. (Herschel’s own thermometer could be read to 0.2 °C
(0.036 °F), and later models were able to be read to 0.05 °C (0.09 °F)). Then a break-
through occurred; Melloni connected a number of thermocouples in series to form the
first thermopile. The new device was at least 40 times as sensitive as the best thermome-
ter of the day for detecting heat radiation capable of detecting the heat from a person
standing three meters away.
The first so-called ‘heat-picture’ became possible in 1840, the result of work by Sir John
Herschel, son of the discoverer of the infrared and a famous astronomer in his own right.
Based upon the differential evaporation of a thin film of oil when exposed to a heat pat-
tern focused upon it, the thermal image could be seen by reflected light where the inter-
ference effects of the oil film made the image visible to the eye. Sir John also managed
to obtain a primitive record of the thermal image on paper, which he called a
‘thermograph’.
#T559845; r. AJ/37554/37554; en-US
149

Table of Contents

Other manuals for FLIR E60

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FLIR E60 and is the answer not in the manual?

FLIR E60 Specifications

General IconGeneral
Resolution320 x 240 pixels
Thermal Sensitivity<0.05°C at 30°C
Field of View25° x 19°
Battery Life4 hours
Spatial Resolution1.36 mrad
Image Frequency60 Hz
MeterLinkYes
Laser PointerYes
Text AnnotationYes
Storage MediaSD card
Spectral Range7.5 – 13 µm
Temperature Range-20°C to +650°C
Display3.5" LCD touchscreen
FocusManual
Accuracy±2°C or ±2% of reading
Image ModesThermal, visual, MSX
Voice AnnotationYes
Battery TypeLi-Ion battery
Minimum Focus Distance0.4 m
Operating Temperature Range-15°C to +50°C
Storage Temperature Range-40°C to +70°C
ConnectivityWi-Fi, USB
Image StorageJPEG

Related product manuals