Using the System
11
To access the Camera Toolbar:
• Move the mouse to the top of the channel display. The Camera Toolbar has the follow-
ing options:
1. Quick Playback.
2. Digital zoom.
3. Real-time backup.
4. Snapshot.
5. Mute/unmute audio.
11.5.1 Using Quick Playback
Quick Playback is used to playback the last 5~60 minutes of video from the selected chan-
nel. You can also access Quick Playback in split-screen mode, while still viewing live video
from the other channels.
To use Quick Playback:
1. Move your mouse to the top of the channel display and click
.
NOTE
By default, the system will begin playback from 5 minutes ago. You can increase this to up to 60 mi-
nutes using the Realtime Play setting in Main Menu>Setting>General.
2. Right-click to exit Quick Playback.
11.5.2 Using Digital Zoom in Live Display
1. Move your mouse to the top of the channel display and click
to activate digital
zoom. A check mark will appear in the icon to indicate digital zoom is activated.
NOTE
You may activate digital zoom in multiple channels at the same time.
2. Click and drag inside the channel to zoom in.
• Click and drag to pan the zoom area.
• Right-click to zoom out and select a new zoom area.
• Click
to disable digital zoom. Note that the channel will remain at the same
zoom level until you right-click inside it.
11.5.3 Using Real-time Backup
Real-time backup allows you to save footage from the live display to a USB thumb drive
(not included) or external hard drive (not included).
#LX400051; r. 1.0/23100/23101; en-US
23
To Next Page
Loading...
Need help?
General
