FLIR SeaFLIR II User Manual

Imaging System
Operator’s Manual
25 Esquire Road, North Billerica, MA 01862 - USA
Phone: (978) 901-8000 Fax: (978) 901-8885
P/N 18704-000 Rev. D – October 2006
Copyright  FLIR Systems, Inc. 2006. Information in this manual is
subject to change without notice. This publication or any part thereof
may not be reproduced in any form without the expressed written
permission of FLIR Systems, Inc.
This document is controlled to FLIR Technology Control Level 2.
U.S. government authorization is required prior to export. Diversion
contrary to U.S. Law prohibited. Contact FLIR Systems, Inc. Export
Compliance Department for further information.
Commercial in Confidence
Export Level 2
Issued to: AgustaWestland
CM Ref:4049
Valid on Day of Issue only.
Document will not be updated
Uncontrolled : 4256
Retrieval Date:07-Dec-10
Requested by Bower, Richard

FLIR SeaFLIR II Specifications

General

Brand	FLIR
Model	SeaFLIR II
Category	All in One Printer
Language	English

Summary

Safety Precautions

General Warnings

Crucial safety warnings regarding laser hazards and system voltage.

Cautions

SeaFLIR II System Components

Stabilized Gimbal Assembly (SGA)

Explains the core component responsible for image stabilization and movement.

Forward Looking Infrared Camera

Details the IR camera's specifications, operation, and sensor technology.

CCD Camera

Laser Pointer (Optional)

Control Electronics Unit (CEU)

Hand Control Unit (HCU)

System Installation

Operating Instructions

Controls and Indicators Overview

Introduces the system controls and their functions.

Tracker Modes and Auto-Tracker

Explains tracker modes, including PCORR, SCENE, and the Auto-Tracker feature.

Display Settings and Symbology

Menu Navigation and Configuration

System Start-Up, Shutdown, and Reset

Advanced Operation Modes

Maintenance and Service Instructions

Preventive Maintenance

Troubleshooting System Faults

Provides guidance on identifying and resolving system faults using flowcharts.