FLIR T6xx series

Handling the camera14
14.4 Adjusting the viewfinder’s dioptric correction
14.4.1 Figure
CAUTION
Applicability: Cameras with a viewfinder.
Make sure that the beams from the intensive energy sources do not go into the viewfinder. The beams
can cause damage to the camera. This includes the devices that emit laser radiation, or the sun.
Note
This item is subject to camera model.
14.4.2 Procedure
Follow this procedure:
1. To adjust the viewfinder’s dioptric correction, look at the displayed text or graphics on
the screen, and rotate the adjustment knob clockwise or counter-clockwise for best
sharpness.
Note
• Maximum dioptric correction: +2.
• Minimum dioptric correction: –2.
#T559598; r. AB/ 9443/9443; en-US
25