FLIR T6xx series

Annotating images20
2. Use the joystick to select .
3. Push the joystick to display a submenu.
4. On the submenu, select Voice. This will display a voice recording toolbar.
5. Do one or more of the following, and push the joystick to confirm each choice. Some
buttons have more than one function.
• To start a recording, select
.
• To pause/resume a recording, select
.
• To stop a recording, select
.
• To listen to a recording, select
.
• To pause a voice annotation that you are listening to, select
.
• To go to the beginning of a recording, select
.
• To delete a recording, move the joystick left/right or up/down and select
.
• To save a recording, select Save.
20.4 Creating a text
20.4.1 General
A text is grouped with an image file. Using this feature, you can annotate images by en-
tering free-form text. This text can be revised later.
20.4.2 Procedure
Follow this procedure:
1. To preview an image, push the Autofocus/Save button fully down and release it.
2. Use the joystick to select
.
3. Push the joystick to display a submenu.
4. On the submenu, select Text. This will display a soft keyboard where you can enter
the text you want to save.
Note
To select special characters, press and hold down the corresponding key on the soft keyboard.
#T559598; r. AB/ 9443/9443; en-US
54