Tau User’s Manual 2—Optional Tau Accessories
TAU-0035-00-10, version 100 April 2009 2-3
Figure 2-3: Digital Data Serial-to-Parallel Module or SIPO (Part Number: 333-0017-00)
FLIR’s optional serial-in, parallel-out (SIPO) module converts the serial LVDS into parallel data.
The SIPO mates directly to the I/O module’s digital data port, and furnishes a 68-pin connector
that can be attached to a frame grabber via a digital interface cable. This accessory facilitates
capture of the LVDS serial digital data channel from the Tau camera and mirrors it in a parallel
format used with computer-based capture boards.
These boards require third-party software not offered or formally supported by FLIR. Refer to
Chapter 4 for details on known compatible frame grabbers and interface cables, as well as
setup files for the two we have verified.
2.3 Software accessory SDK for Windows & Embedded
The Tau Software Developer’s Kit (SDK Part Number 110-0102-46) enables
camera control using one of several programming languages including VB6, VB.net,
C#, and C++ (MFC). Code examples are included to help illustrate how some of the
camera control functions can be used. The FLIR Camera Controller is an example of
an application created using the Photon SDK.
Refer to http://www.corebyindigo.com/service/softwareupdates.cfm
.
To Next Page
Loading...
Need help?
General
