Maintenance of the Machine
218333 04/03/2020
69
6. Plug in
the power plug and
the multipolar connector
into the respective connector sockets on the back of the
upper control panel.
7. Place the control panel in the upper insert of the protec-
tive hood.
8. Attach the control panel to the protective hood using the 4
Phillips screws.
9. Insert the multipolar plug into the connector socket on the
back of the lower control panel.
10. Place the control panel in the lower insert of the protec-
tive hood.
11. Attach the control panel to the protective hood using the
4 Phillips screws.
To Next Page
Loading...
