Anti-vibration mat
The anti-vibration mat is essential for the stability of the
HyPlex Prime pump and the reduction of pump vibra
-
tion. The pump should be centered on the mat with no
part of the pump touching the floor beneath.
Place the mat flat on the floor and lower the pump onto
the center of the mat using a forklift.
A pallet jack may be also used to locate the pump, but
the mat should be slid under the pump when suspended
with the pallet jack. Pallet jacks loaded with the weight
of the pump will not roll on the anti-vibration mat.
Do not trim the mat or bolt the pump to the floor
through the mat material.
© Flow International Corporation M-416 | 13
CHAPTER 1
Equipment Description
To Next Page
Loading...
