Flow HYPLEX - Chapter 1: Equipment Description; Base Features and Package Options

CHAPTER 1
Equipment Description
The HyPlex Prime pump is a powerful, ultrahigh-pressure waterjet cutting tool designed for minimum maintenance
and reliable performance. The pump has an operating pressure of 55,000 psi (3790 bar), and a maximum generated
pressure of 60,000 psi (4140 bar).
Base features
•
Triplex pump
•
Totally-enclosed, fan cooled (TEFC) motor
•
Manually adjustable output pressures from
1000–55,000 psi, dual-pressure control optional
•
Dual filter system removes particles larger than
0.5 microns absolute
•
Available in 30 or 50 hp motor, 60Hz or 50Hz
Basic package
For use with Flow X-Y tables prior to those introduced with B&R
controls.
•
Motor starter is not included
Standard package
For use with B&R-controlled Flow X-Y tables.
•
Motor starter is included
Plus package
For use with B&R-controlled Flow X-Y tables.
•
UHP water system pressures are monitored by a
pressure transducer and displayed in FlowCUT
•
Auto-calibration of UHP pressure control system
•
Motor starter is included
Premium package
For use with B&R-controlled Flow X-Y tables.
•
UHP water system pressures are monitored by a
pressure transducer and displayed in FlowCUT
•
Auto-calibration of UHP pressure control system
•
Motor starter is included
•
FlowSENSE, an early warning system for critical parts
© Flow International Corporation M-416 | 5