Flow HYPLEX - Page 4

4 | M-416 ©FlowInternationalCorporation
HYPLEX PRIME
Maintenance & Service Manual
Introduction
The information in this manual will help you become familiar with your new Flow International (FLOW) equipment. It
was compiled from the most current information available at the time of publication and is intended to cover the most
common configurations. Your equipment was shipped with other documents and drawings. Refer to these drawings
when using the service procedures in this manual.
Safety
All operating personnel and service technicians must read and follow the comprehensive list of safety precautions in all
manuals provided with your equipment before installing, operating, or servicing the equipment. This will help avoid
creating unsafe conditions or equipment damage.
The high-pressure waterjet system is a powerful cutting tool and must always be treated with respect.
Warnings, cautions, and notes
Before operating the equipment, you must read, understand, and follow all warnings, cautions, and notes in this man
-
ual. They are defined as follows:
WARNING
Highlights an operating or service procedure or condition that can
result in death or serious injury to personnel.
CAUTION
Highlights an operating or service procedure or condition that can
lead to impaired system operation or equipment damage.
Note: Highlights an operating or service procedure or condition that is essential for efficient operation and service.