Troubleshooting the HyPlex Prime
Premium pump using FlowSENSE
FlowSENSE is only available for the Premium package.
HyPlex Prime Premium pumps are continuously monitored
by FlowSENSE, a diagnostic program that monitors a num
-
ber of system conditions, some of which are specific to
pump conditions. Sensors located on the pump enable
FlowSENSE to alert the operator of pump conditions that
will require attention. To indicate a warning, the positional
indicator on the FlowCUT Run Machine screen will blink. If
a shutdown condition exists, a dialog box will appear on
the machine console display.
To investigate the cause for the of the fault, and how it can
be corrected, select Advanced | FlowSENSE diagnostic in
the FlowCUT menu bar. Errors and warnings are indicated
in the window.
More information about using the FlowSENSE Diagnostic
functionality can be found in FlowCUT integrated help.
© Flow International Corporation M-416 | 29
HYPLEX PRIME
Maintenance & Service Manual
To Next Page
Loading...
