EasyManua.ls Logo

Flowserve ARGUS E25 MOD II - Maintenance and Service; Post-Operation Procedures; Routine Unit Maintenance

Flowserve ARGUS E25 MOD II
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Argus E25 MOD II - Operating Instructions
30
After operation
DANGER
For units installed in contami-
nated areas, there is a danger
of severe or lethal injury from
hazardous substances on the
unit.
Work on contaminated units
shall only be carried out by
specialist personnel.
Wear the specified protec-
tive clothing during all work
in the contaminated area.
Make sure the unit has been
fully decontaminated before
working on it.
During such work follow the
instructions for handling the
hazardous media concerned.
Cleaning to remove external
dirt
CAUTION
Danger of burns from hot sur-
faces or thermal radiation
Wear protective clothing
suitable for the tempera-
tures that occur in the plant.
Remove external dirt from the unit
with clean water and a lint-free
cloth.
To remove stubborn dirt, use a
cleaning agent suitable for the de-
posits and a lint-free cloth.
Maintenance of the unit
CAUTION
Danger of burns from hot sur-
faces or thermal radiation.
Wear protective clothing
suitable for the tempera-
tures that occur in the plant.
The unit requires little maintenance.

Related product manuals