6 - 16 92B/96B/99B/105B Users Manual
WAVEFORMS Print the selected waveform. The
waveform is printed in a numerical format that represents
sample data points (Scope mode only). You can calculate
the real voltage of each data point by subtracting the Y-pos
from the data point value (3-0=3, etc), then multiplying this
with the 200 mV/dot parameter (3 * 200 mV = 600 mV).
The time distance between two dots is 20.0 µs here.
Printing Grey in White or Black
Print the grey persistence of the display as white or as
black on paper.
Sending to a Printer
Press to start printing via the OPTICAL INTERFACE
port. The settings you made in the User Options menu will
be used.
To Next Page
Loading...
