Getting Started 2 - 3
ADJUSTING THE DISPLAY
Adjusting the Contrast
•
Use
to adjust the contrast of the display to
your preference. Note that new contrast adjustment of
the display is stored in memory until a new adjustment
is made.
Figure 2-1. Contrast adjustment
Contrast adjustment can also be made after you have
pressed , and you have highlighted the contrast with
, and pressed to select. is then
visible in the right bottom of the display.
Using the Backlight
You can set the backlight to high or low intensity. At power-
on, the backlight is set to high intensity.
High intensity becomes extra high when the test tool is
connected to the line power.
To set the backlight intensity, do the following:
1. Press to set the backlight to low intensity.
If you do not set the backlight to low intensity within 5
minutes after power-on, when the testool is battery
powered, the backlight automatically switches to low
intensity to save battery power.
If you want to work with a bright display, do the
following:
2. Press to set the backlight to high intensity.
The actual power source, BATTERIES or POWER
ADAPTER, appears for a moment on the display.
The backlight will now remain at high intensity until you
set it to low intensity.
NOTE
Using the backlight at low intensity lengthens battery life.
To Next Page
Loading...
