Fluke 105B - Using the Min Max Envelope Function of the Fluke 92 B; Using the Min Max Envelope Function

Using in Scope Mode 5 - 21
USING THE MIN MAX ENVELOPE FUNCTION
OF THE FLUKE 92B
This function displays changes in the shape of a waveform
as a grey area around the actual trace. It keeps track of
minimum and maximum values that occur over time.
Using the Min Max Envelope Function
To use this function, do the following:
1. Press .
NOTE
Any change in attenuation or time base will start a new Min
Max envelope recording.
2. To turn off Min Max envelope recording, do one of the
following:
•
Press a second time.
•
Press .