7 - 8 92B/96B/99B/105B Users Manual
Select Continuous Auto Set.
Open the Math menu.
Select each item.
Store the resulting waveform in Destination memory 1.
Close the window.
In Figure 7-7, INPUT A represents the current measure-
ment, INPUT B the voltage measurement, and Destination
memory 1 the product (equals power).
In this example the following scales are used:
INPUT A: 20 A/DIV
INPUT B: 200 V/DIV
Memory 1: 4 kW/DIV
Figure 7-7. Power measurement
Shift the resulting waveform over the display as follows:
: move 1
Move the resulting waveform.
To Next Page
Loading...
