2 - 8 92B/96B/99B/105B Users Manual
8. Some measurements are done in another mode. This message appears in a double-lined
box on the display: "This measurement is possible in SCOPE mode. Change to SCOPE
mode now ?".
9. The test tool changes automatically to the Scope mode. You can now find the Rise Time
measurement result below the waveform area.
10. The left and right cursors move across the display. The intersection of waveform and cursor
mark the level for the two horizontal cursors.
This completes the Quick Measurements Demonstration; continue with the Meter Operations.
QUICK MEASUREMENTS DEMONSTRATION
To Next Page
Loading...
