Characteristics
2.9 Service and Maintenance 2
2-13
Salt Exposure MIL28800F, Class 2, 3.8.8.2 & 4.5.6.2.2.
Structural parts meet 48 hours 5% salt
solution test.
Electromagnetic Compatibility (EMC)
Emission EN 50081-1 (1992): EN55022 and
EN60555-2
Immunity EN 50082-2(1992): IEC1000-4-2, -3, -4, -
5 (see also Section 2.9, Tables 2-1 to 2-3)
Enclosure Protection IP51, ref: IEC529
2.9 Service and Maintenance
Calibration Interval 1 Year
2.10 Safety
Designed for measurements on 600 Vrms Category III Installations, Pollution Degree
2, per:
• ANSI/ISA S82.02.01
• EN 61010-1: 2001
• CAN/CSA-C22.2 No.61010-1-04 (including
c
CSA
us
approval)
Max. Input Voltage Input A and B
Direct on input, with leads, with VP40 600 Vrms. For derating see Figure 2-1/2.
With Banana-to-BNC Adapter BB120 300V rms. For derating see Figure 2-1.
Max. Floating Voltage
from any terminal to ground 600 Vrms up to 400Hz
ST8112.CGM
Figure 2-1. Maximum Input Voltage vs Frequency
To Next Page
Loading...
