List of Replaceable Parts
6.6 Service Tools 6
6-7
6.6 Service Tools
Power adapter cable to check supply current 5322 320 11707
6.7 Accessory Replacement Parts
Table 6-3. Standard Accessories
Description Model Number/Ordering Code
Power Adapter/Battery Charger, available models:
Universal Europe 230V, 50Hz
North America 120V, 60Hz
United Kingdom 240V, 50Hz
Japan 100V, 60Hz
Australia 240V, 50Hz
Universal 115V/230V
(*)
(*)
UL listing applies to PM8907/808 with UL listed line plug adapter
for North America. The 230 V rating of the PM8907/808 is not for use
in North America. For other countries, a line plug adapter complying
with the applicable National Requirements must be used.
PM8907/801
PM8907/803
PM8907/804
PM8907/806
PM8907/807
PM8907/808
Set of two Shielded Test Leads (Red and Gray), designed for use only
with the Fluke ScopeMeter 120 series test tool.
Set contains the following replaceable part: Ground Lead with Alligator
Clip (Black)
STL120
5322 320 11354
One 10:1 Scope Probe VP40 VPS40 (is VP40 probe including
hook clip and ground lead)
AC Current Clamp 40 A / 400 A (Fluke 125) i400s
Test Lead for Grounding (Black) TL75 (red + black lead)
Set of two Hook Clips (Red and Gray) HC120
Set of three Alligator Clips (Red, Gray, and Black) AC120
Banana-to-BNC Adapter (Black) BB120 (Set of two)
CD-ROM with Users Manual (All languages)
Note: all manuals can be downloaded from Fluke’s website
www.fluke.com
4022 240 12370
To Next Page
Loading...
