Fluke 123 - Final Assembly Parts

Fluke 123/124/125
Service Manual
6-4
6.4 Final Assembly Parts
See Table 6-1 and Figure 6-1 for the Final Assembly parts.
Table 6-1. Final Assembly Parts
Item Description Ordering Code
1 top case assembly 5322 442 00272
1 window/decal (lens) Fluke 123 4022 240 12431
1
1
window/decal (lens) Fluke 124
window/decal (lens) Fluke 125
4022 240 13031
0040 243 00801
2 shielding foil 5322 466 11434
3 dust seal 5322 466 11435
4 conductive foam strip 5322 466 11436
5 display shielding bracket 5322 402 10204
6 display assembly 5322 135 00029
7 keypad 5322 410 10397
8 keypad foil 5322 276 13711
9 keyboard pressure plate 5322 466 10963
10 combiscrew M3x10 5322 502 21507
11 bottom case 5322 442 00273
12 combiscrew M3x10 5322 502 21507
13 battery pack (Ni-MH) BP120MH
14 battery door 4022 244 98491
15 combiscrew M3x10 5322 502 21507
16 bail 5322 466 10975
A Main PCA unit for Fluke 123/124 or 125. The Main PCA in
this Analyzer is only available to Fluke Service Centers
due to the programming that is necessary after
installation.
---
Note
The Test Tool contains a Rechargeable Ni-MH battery. Do not mix with
the solid wastestream. Spent batteries should be disposed of by a qualified
recycler or hazardous materials handler.