150X Series
Calibration Manual
2
• Comply with local and national safety requirements when working in
hazardous locations.
• Use proper protective equipment, as required by local or national
authorities when working in hazardous areas.
• Avoid working alone.
• Use only the replacement fuse specified or the protection may be
impaired.
• Check the test leads for continuity before use. Do not use if the
readings are high or noisy.
Table 1. Symbols
B AC (Alternating Current) J Earth Ground
F DC (Direct Current) I Fuse
X WARNING: risk of electric shock. T Double Insulated
b
Battery (Low battery when shown on
display.)
W Important information; see manual
Contacting Fluke
To contact Fluke, call:
1-888-993-5853 in USA +81-3-3434-0181 in Japan
1-800-363-5853 in Canada +65-738-5655 in Singapore
+31-402-678-200 in Europe
+1-425-446-5500 from anywhere in the world
Visit Fluke's web site at: www.fluke.com
Register your Meter at: register.fluke.com
Downloaded from Elcodis.com electronic components distributor
To Next Page
Loading...
Need help?
General
