1773/1775/1777
Users Manual
20
Energy Analyze Plus Software
Purchase of the Product includes Fluke Energy Analyze Plus software. Use the software to do
many tasks from a computer:
Update the Analyzer firmware.
Download campaign results for further processing and archiving.
Analyze energy or load profiles, including zoom-in and zoom-out on details.
Analyze voltage and current harmonics.
Review the voltage and current events that occur during the campaign.
Add comments, annotations, pictures, and other supplementary information to campaign
data.
Overlay data from different campaigns to identify and document changes.
Create a report from the analysis.
Export measurement results for further processing using a third party tool.
System Requirements
The computer hardware requirements for the software are:
Free Hard Disk space minimum 300 MB, >100 GB (for measurement data) recommended.
Additionally, Energy Analyze can use up to 3 % of the disk size for internal logs. Internal log
data is not shared with Fluke or any third party unless allowed by the user.
Installed Memory:
2 GB minimum, >2 GB recommended for 32-bit systems
≥8 GB recommended for 64-bit systems
Monitor, 1280 x 1024 (@4:3) or 1440 x 900 (@16:10), wide-screen (16:10) or higher
resolution recommended
Ethernet, WiFi, or USB ports
Windows 8.1 32/64-bit, Windows 10 32/64-bit
Energy Analyze Plus software performance improves on systems with SSD data storage. For
future updates, Fluke recommends systems based on CPUs that support the SSE4/BMI2
instruction set.
Note
Windows 7 Starter edition and Windows 8 RT are not supported. Energy Analyze Plus
also works on Windows Vista and Windows 7 systems but is not specifically tested
because manufacturer support has been discontinued.
To Next Page
Loading...
Need help?
General
