Introduction and Specifications
Introduction 1
1-3
Introduction
The Fluke 52120A Transconductance Amplifier (the Product) is a precision current
amplifier that can:
• Accept full scale dc or ac inputs of 2 volts or 200 mA from any calibrator, signal
generator or power supply
• Deliver proportional output current in ranges of 2 A, 20 A or 120 A at frequencies to
10 kHz
• Offer enhanced accuracy to 140 ppm when used in closed-loop mode with a 6105A
Electrical Power Standard
• Operate in parallel with one or two other Products to deliver 240 A or 360 A
• Push current with compliance voltage of 4.5 V rms or 6.4 V peak
• Drive inductive loads to 1 mH
• Drive optional current coils to deliver test currents of 3000 A or 6000 A
How to Contact Fluke
To contact Fluke Calibration, call one of the following telephone numbers:
• Technical Support USA: 1-877-355-3225
• Calibration/Repair USA: 1-877-355-3225
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31-40-2675-200
• Japan: +81-3-6714-3114
• Singapore: +65-6799-5566
• China: +86-400-810-3435
• Brazil: +55-11-3759-7600
• Anywhere in the world: +1-425-446-6110
To see product information and download the latest manual supplements, visit Fluke
Calibration’s website at www.flukecal.com
To register your product, visit http://flukecal.com/register-product.
To Next Page
Loading...