Introduction and Specifications
How to Connect the Product to Mains Power 1
1-9
Table 1-3. Line Power Cord Types Available from Fluke
Country Fluke Part Number
UK 1998167
Europe 1998171
Australia, New Zealand 920385
China 920431
USA, Japan 1998209
Other (no plug fitted) 1998211
Note
Typical maximum power requirement of the Product at 115 V is 1500 VA.
Make sure the mains supply outlet is rated for this load and has a grounded
three-prong outlet. Make sure the outlet ground connector is connected to
earth ground.
If a mains power cord is supplied without a mains connector, use the color codes below
when you connect a connector to the power cord.
Line = Brown
Neutral = Blue
Earth = green/yellow
To Next Page
Loading...