Micro-Bath
Contact Fluke Calibration
3
• If a mains supply power fluctuation occurs, immediately turn off the bath. Power
bumps from brown-outs and black-outs can damage the instrument. Wait until the
power has stabilized before re-energizing the bath.
• Fluke Calibration does not recommend the use of water as a fluid in the Product. If the
tank coating is compromised, galvanic corrosion will occur due to dissimilar metals
and the presence of water (electrolyte).
Note
Disregard any references to the use of water as a bath fluid in this manual.
Contact Fluke Calibration
Fluke Corporation operates worldwide. For local contact information, go to our website:
www.flukecal.com
To register your product, view, print, or download the latest manual or manual supplement, go to our
website.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
+1-425-446-5500
info@flukecal.com
Service Information
Contact an authorized Fluke Calibration Service Center if the Product needs calibration or repair during
the warranty period. Please have Product information such as the purchase date and serial number
ready when you schedule a repair.
To Next Page
Loading...
