1
Multifunction Process Calibrator
Introduction
WWarning
Read "Safety Information" before using the
Calibrator.
The Fluke 725Ex Multifunction Process Calibrator
(hereafter referred to as “the Calibrator”) is a handheld,
battery-operated instrument that measures and sources
electrical and physical parameters. For a summary of
source and measurement functions, see Table 1.
In addition to the functions in Table 1, the Calibrator has
the following features and functions:
• A split-screen display - The upper display allows the
user to measure volts, current, and pressure only.
The lower display allows the user to measure and
source volts, current, pressure, resistance
temperature detectors, thermocouples, frequency,
and ohms.
• Calibrates a transmitter using the split-screen.
• A thermocouple (TC) input/output terminal and
internal isothermal block with automatic reference
junction temperature compensation.
• Stores and recalls setups.
• Manual stepping and automatic stepping and
ramping.
Contacting Fluke
To order accessories, receive operating assistance, or get
the location of the nearest Fluke distributor or Service
Center, call:
USA: 1-888-44-FLUKE (1-888-443-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
Service in USA: 1-888-99-FLUKE (1-888-993-5853)
Or, visit Fluke's Web site at www.fluke.com
.
To register this product, visit register.fluke.com
To Next Page
Loading...
