Fluke 725Ex - Certification Information; Getting Acquainted with the Calibrator; Input and Output Terminals

725Ex
Users Manual
10
Certification Information
• P ( II 1 G EEx ia IIB 171 °C
0344 KEMA 04ATEX1303X
• ) Class I Div. 1 Groups B,C, and D
LR110460 Class I Zone 0 Aex/Ex ia IIB 171 °C
2004.1573226
• Ta = -10 °C… +55 °C
• Manufactured by Martel Electronics, Inc., 1F
Commons Drive
Londonderry, NH, USA
Getting Acquainted with the Calibrator
Input and Output Terminals
Figure 2 shows the Calibrator input and output terminals.
Table 3 explains their use.
V mA
LOO P
V mA
TC RTD
˚
C
˚
F
Hz
100%
25%
25%
RECALL
ZERO
MEAS
SOURCE
STORE
SETUP
0%
MULTIFUNCTION
PROCESS CALIBRATOR
725Ex
8
7
6
5
4
3
2
1
2004.1573266
LR110460
Zone 0 AEx ia IIB 171 C
I.S. Class I Div 1, Groups B,C,D
aly05f.eps
Figure 2. Input/Output Terminals and Connectors