Fluke 725Ex - Pressure Measurement; General Specifications

Multifunction Process Calibrator
Specifications
59
Pressure Measurement
Range Resolution Accuracy Units
Determined by
pressure module
5 digits Determined by
pressure module
psi, inH2O@4 °C, inH2O@20 °C, inH2O@60 °F, kPa,
cmH2O@4 °C, cmH2O@20 °C, bar, mbar, kg/cm
2
, mmHg,
inHg
General Specifications
Operating temperature -10 °C to 55 °C
Storage temperature - 20 °C to 71 °C
Operating altitude 3000 meters above mean sea level
Relative Humidity
(% RH operating without condensation)
90 % (10 to 30 °C)
75 % (30 to 40 °C)
45 % (40 to 50 °C)
35 % (50 to 55 °C)
uncontrolled < 10 °C
Vibration Random, 2 g, 5 to 500 Hz
Product Compliance Markings
P ( II 1 G EEx ia IIB 171 °C
0344 KEMA 04ATEX1303X
) Class I Div. 1 Groups B,C, and D
LR110460 Class I Zone 0 Aex/Ex ia IIB 171 °C
2004.1573226
Ta = -10 °C… +55 °C
Manufactured by Martel Electronics, Inc., 1F Commons Drive
Londonderry, NH, USA
EMC EN 61326-1: 1997 + A1; 1998 + A2:2000, Criteria B
Power requirements 4 AA alkaline batteries- See “Approved Batteries”
Size 96 x 200 x 47 mm. (3.75 x 7.9 x 1.86 in)
Weight 650 gm (1 lb, 7 oz)