Fluke 805 FC - Audio (805 only)

Vibration Meter
How to Operate
15
Audio (805 only)
The Meter has an audio connector for headphones.
Headphones are useful for detection of unusual machine
sounds.
To listen to a machine:
1.
Open the connector cap of the Meter and connec
t
the audio
connecto
r.
2.
Put on the headphones.
3.
Push and continue to hold 
.
4.
Push the sensor tip onto the test surface.
As you continue to hold  and Meter position
with a co
nsistent force, the audio channe
l is
active. The M
eter also takes a measurem
ent at
this time.
Figure 4 shows how to make the audio connection to the
Meter.
gqi04.eps
Figure 4. Audio Connection (805 only)
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com