Fluke 805 FC - Save to Current Setup; Save to New Setup

805/805 FC
Users Manual
26
Save to Current Setup
This option saves the measurement to the current setup in
the Meter. Push  to save the measurement. The
Meter indicates the record number it is saving.
Save to New Setup
This option saves the measurement to a new setup.
To save a measurement with a new Setup name:
1. Select Sav
e to: New Setup in the Save screen.
2. Push   to highlight M
achine Category
.
3. Push
 to
select the opti
on.
4. Push
  to highlight RPM Range S
election
.
5. Push
 to
select the option to open th
e
Cre
ate Setup screen.
6.
Select the numbers and letters to enter
a new
name. See Create New Se
tup
for more
informatio
n about how to use this screen
7. Push  to save the current measurement with
a new n
ame.
The Meter prompts you to give the setup a Second
Level ID.
• Selec
t Yes enter a name for the Second
Level
ID. and then
push 
.
• Selec
t No to sa
ve the setup.
You can
continue this process and set up as many
Second Level IDs as necessary for the job. When
done, select No to go back to the Measurement
Results menu.
First Level ID
Second Level ID
gqi19.eps
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com