Fluke 805 FC - Firmware Upgrades

Vibration Meter
Firmware Upgrades
39
Firmware Upgrades
At intervals, upgrades are available for the Meter firmware.
Contact Fluke for upgrade availability. If you have
registered your Meter purchase, Fluke will send an
upgrade notice to you automatically.
To upgrade the Meter:
1.
Download the upgrade file for the Mete
r from the
Fluke web
site at www.fluke.com
.
2. Connect the USB cable to the PC or laptop. See
USB on pag
e 16 for more informatio
n.
3.
Make sure the Meter is
off.
4.
Simultaneously push and hold  and 
as
you con
nect the other end
of the USB cable to the
Meter.
The Mete
r boots up in the firmware upgrade mode
and stays on while it is connecte
d to the PC.
5.
Identify the external disk that is the Mete
r in an
Explorer
window on the computer.
6.
Make a copy of the upgrad
e file to the external
disk that is the Meter.
7.
Right-click on the external disk and select eject.
8.
Disconnect the Meter from the host PC.
9.
Restart the Me
ter.
The Mete
r operates with the new firmwa
re after
the restart.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com