Fluke 805 FC - Add to Setup; Enable Fluke Connect (805 FC only)

805/805 FC
Users Manual
24
Add to Setup
You can add a Second Level ID to a setup in the Meter
memory at any time.
To add a new Second Level ID:
1. Push .
2. Push
 and  to highlight Add to Setup.
3. Push
 and  to highligh
t
the Setup name.
4. Push
 to o
pen the menu for the Seco
nd
Level ID.
5. Push
   and  to high
light a letter or number.
6. Push  to
set the letter or number.
7.
Repeat steps 5 and 6 to make a unique
name for
the setup.
8. Push .
After the Meter s
aves this new Seco
nd Level ID, it
goe
s back to the Setup me
nu.
Enable Fluke Connect (805 FC only)
You can transmit the most recent measurement with
wireless technology and view the results on the Fluke
Connect App on your device.
Note
You need to enable Fluke Connect each time you
turn on the Meter. When Fluke Connect is
enabled, a wireless icon (
) shows on the LCD.
To enable Fluke Connect:
1. Push .
2.
Use the navigation buttons to select
Enable Fluke
Conn
ect
.
To disa
ble Fluke Connect:
1. Push .
2.
Use the navigation buttons to select Disa
ble
Fluke Con
nect
.
To tran
smit a measurement to Fluke Connect:
1.
Take a measurem
ent.
2. Push
 t
o open the Save screen
.
3.
Select a method to sa
ve data.
Whe
n you save, the Meter transmits the
data to
Fluke Con
nect app.
4.
Use the Fluke Connect App on your dev
ice to
receive and v
iew the test result
s.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com