Vibration Meter
About Measurements
23
5. Push to set the category and open the
RPM Ra
nge menu.
By default, the RPM range is set to >600
RPM and
is co
rrect for most applications. To chan
ge the
RPM ran
ge: push and to highlight the
RPM
Rang
e
.
6. Push
to
set the range and op
en the
Cre
ate Setups menu for the First Level ID
.
gqi94.jpg
7. Push and to highlight a letter or number.
8. Push to
set the letter or number.
9.
Repeat steps 8 and 9 to make a unique
name for
the setup.
10. Push .
The Mete
r prompts you to give the setup a Second
Level ID. The Yes option opens the menu
to key in
a name for the ID.
11. Push
.
You can
continue this process and set up
as many
Secon
d Level IDs as necessary for the jo
b. For
example, you
can enter the bearing num
ber that
the measure
ment is taken from, such as
,
Bearin
g_1 on
FAN1.
Whe
n done, select No to go back to th
e Setup
menu. To recall a setup, see View Setups on
page 2
9
.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
