Fluke 805 FC - Page 46

805/805 FC
Users Manual
36
7. Click each drop-down list to select the Machine
Con
figuration from the saved measurement data:
• Machine Categories
• Machine Na
me
• Select Seco
ndary
Name
8.
Click the drop-down list for the ISO Standard a
nd
cla
ss.
9.
Click each drop-down list to select the
Graph Axis
& Unit Selection for the plot:
•
X-axis required Parame
ters
•
X-axis required Unit
s
•
Y-axis required Parame
ters
•
Y-axis required Unit
s
•
Option for a secondary Y-axis (shows on
the
right sid
e of the graph)
• Option to show the Fluke
Overall Vibration
Severity Scale
10. Click
Plot Graph.
Figure 9 is an
example of a graph you ca
n make
with mea
surement data from the Meter.
gqi206.bmp
Figure 9. Data Plot Graph
Note
You can Print the results to a local printer, press
Ctrl + P to open up the Print menu.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com