8508A
Users Manual
Unpacking and Inspection
Every care is taken in the choice of packing material to ensure that your equipment will
reach you in perfect condition.
If the equipment has been subject to excessive handling in transit, the fact will probably
be visible as external damage to the shipping carton.
In the event of damage, the shipping container and cushioning material should be kept for
the carrier’s inspection.
Carefully unpack the equipment and check for external damage to the case, sockets etc. If
the shipping container and packing material are undamaged, they should be retained for
use in subsequent shipments. If damage is found notify the carrier and your sales
representative immediately.
For orders of the model 8508A/01 check that the instrument has the six terminals on the
rear panel for connection of signals.
Standard Accessories
The standard accessories supplied with the instrument are shown in Table 1-1. The type
of power cable supplied is determined at the time of ordering.
Table 1-2 lists additional accessories available for use with the Multimeter.
Table 1-1. Standard Accessories
Description Location Order Number
Power Cable
USA LC1 284174
UK LC4 769455
Europe LC3 769422
Swiss LC5 769448
India LC7 782771
China / Fiji / New Zealand LC6 658641
Brazil LC42 3841347
General Purpose Probe Kit and Wallet comprising:
2x Test Leads with 4mm Safety shroud plugs (Red and Black)
2x Test Probe (Red and Black)
2x Crocodile clips (Red and Black)
2x 4w Zero PCB
1903307
1907075
1908153
2463103
Users Manual 1673798
1-4
To Next Page
Loading...
