Fluke 8508A - Complete Operations; Status Reporting

8508A
Users Manual
Complete Operations
*OPC
A synchronization command that generates an operation complete message in the
standard Event Status Register when all pending operations have been processed by the
parser.
OPC
∗
adj253f.eps
Complete
OPC?
A synchronization command that places the ASCII character ‘1’ in the output queue
when all pending operations have been processed by the parser.
OPC?
∗
adj254f.eps
Complete?
Status Reporting
Most of the commands in this sub-section are standard reporting commands defined in
the IEEE-488.2 standard.
4-40