8508A
Users Manual
ACV Resolution
Press the Resl key to see the ACV RESL menu:
adj068f.eps
ACV RESL Menu
5 5-1/2-digits resolution
6 6-1/2-digits resolution
To revert to the
ACV CONFIG menu, press the Config key.
ACV Filter
Press the Filt key to see the ACV FILT menu:
adj069f.eps
ACV FILT Menu
The ACV FILT menu allows selection of one of four RMS filters. The indicated value is
the lowest signal frequency that can be measured without degradation of accuracy and
excessive reading variation.
The default setting at power on is
40 Hz.
Note
Measurement results are invalid when using internal triggers in Transfer mode with the 1
Hz filter selected. For valid results, use Ext Trig and Sample, or trigger via the IEEE-488
interface.
AC Voltage - Movement between Menus
TOGGLE
ON/OFF
TOGGLE
ACV
CONFIG
ON/OFF
TOGGLE
adj070f.eps
AC Voltage Menu Tree
3-10
To Next Page
Loading...
