Fluke Biomedical IDA-4 Plus - Page 74

IDA-4 Plus
Operators Manual
B-6
ASCII Code Function Number of
Parameters
IDA-4 Plus
< - - >
BYE Terminates
Computer Control
0 - - >
POLL Returns # of
channels installed
0 < - - >
PRESUn Sets the pressure
units
n = Channel number - - >
CnF,a,b,c Starts a Flow Test 3,
n = Channel number
- - >
CnV,a,b,c Starts a Volume
Test
3,
n = Channel number
- - >
CnO,a,b,c Starts an Occlusion
Test
3,
n = Channel number
- - >
CnPCA,a,b,c Starts a PCA test 3,
n = Channel number
- - >
CnD,a,b,c,d,e,f Starts a Dual Flow
Test
6,
n = Channel number
- - >
END,n End a Test n = Channel number - - >
FLOWn Fetches current flow
rate
n = Channel number < - - >
VOLn Fetches current
volume
n = Channel number < - - >
PRESn Fetches current
pressure
n = Channel number < - - >
PKPRESn Fetches the peak
pressure
n = Channel number < - - >
PCATRIGn Requests the start of
a PCA trigger
n = Channel number - - >
Table B-1: ASCII Code Commands used in the Computer Control Protocol