Fluke Biomedical IDA-4 Plus - Fetch the Current Pressure on a Channel [Presn]; Fetch the Peak Pressure on a Channel [Pkpresn]

Infusion Pump Analyzer
Computer Control Commands
B
B-5
Fetch the Current Pressure on a Channel [PRESn]
Returned to host:
[PRES, pppp,hh:mm:ss:mmm] <CR><LF>
Where:
pppp is the pressure in the selected units
hh:mm:ss:mmm is the time since the start of the test, formatted as:
hh Hours
mmMinutes
ss Seconds
mmm Milli-seconds
Fetch the Peak Pressure on a Channel [PKPRESn]
Returned to host:
[PK
P
Where:
pppp is the peak pressure in the selected units
hh:mm:ss:mmm is the time since the start of the test, formatted as:
hh Hours
mm Minutes
ss Seconds
mmm Milli-seconds