Chapter 1: Get Acquainted
Safety Information
7
Safety Information
Table 1 shows the international electrical symbols used on the
tester or in this manual. Symbols for certifications and compliance
are on page 131.
: This key turns the tester on and off.
Warning
To prevent possible fire, electric shock, or personal
injury:
Use only AC adapters approved by Fluke Networks
for use with the tester to supply power to the tester
and charge the battery.
Do not put the battery pack in a fire or an
environment with temperatures more than 140 °F
(60 °C).
Do not use the tester in damp or wet environments.
Do not short-circuit or disassemble the battery pack.
Do not use the tester if it is damaged. Inspect the
tester before use.
Do not open the case; no user-serviceable parts are
inside.
Do not modify the tester.
Table 1. International Electrical Symbols
Warning: Risk of fire, electric shock, or personal injury.
Warning or Caution: Risk of damage or destruction to equipment
or software. See explanations in the manuals.
Warning: Class 1 (OUTPUT port) and Class 2 (VFL port) lasers. Risk of
eye damage from hazardous radiation.
Do not put products containing circuit boards into the garbage.
Dispose of circuit boards in accordance with local regulations.
To Next Page
Loading...
