1
Chapter 1: Get Acquainted
Overview of the CertiFiber Pro Optical Loss
Test Set Modules
The Fluke Networks CertiFiber
®
Pro Optical Loss Test Set (OLTS)
modules attach to Versiv
™
main and remote units to make
rugged, hand-held testers that let you certify, troubleshoot, and
document optical fiber cabling installations. The testers include
these features:
Measures optical power loss and length on dual-fiber,
multimode cabling at 850 nm and 1300 nm (CFP-MM) or on
dual-fiber singlemode cabling at 1310 nm and 1550 nm
(CFP-SM). The four-wavelength module (CFP-QUAD) measures
at 850 nm, 1300 nm, 1310 nm, and 1550 nm.
Interchangeable connector adapters on input and output
ports let you make reference and test connections that agree
with ISO standards for most SFF (small form factor)
connectors.
Visual fault locator helps you find breaks, bad splices, and
bends and verify fiber continuity and polarity.
You can save approximately 30,000 fiber test results in the
tester’s internal memory. You can save more results on a
removable flash drive.
To Next Page
Loading...
