Chapter 1: Get Acquainted
Verify Operation
23
Verify Operation
The tester does a self test when you turn it on. If the tester shows
an error or does not turn on, refer to “If the Tester Does Not
Operate as Usual” on page 129.
Change the Language
On the home screen, tap the TOOLS icon, tap Language, then tap
a language.
Buttons to Do Tests and Save Results
When a test is completed and more than one button shows at the
bottom of the screen, the tester highlights one in yellow to
recommend which one to tap. Figure 7 shows the buttons you will
see.
Note
To change the Auto Save setting, tap the Next ID
panel on the home screen.
To Next Page
Loading...
