Chapter 9: Maintenance
Traceable Calibration Period
123
Traceable Calibration Period
To make sure that the modules operate within the published
specifications for accuracy, have them calibrated at a Fluke
Networks authorized service center every 12 months.
See Information About the Tester
To see information about your tester and attached modules and
adapters
On the home screen, tap the TOOLS icon, then tap Version
Information.
To see information about a remote tester
Use CertiFiber Pro modules and patch cords to connect the main
and remote testers together (see Figure 5 on page 20), then tap
REMOTE on the Version Information screen.
Update the Software
New software gives you access to new features and the latest test
limits and cable types. Software updates are available on the
Fluke Networks website.
You can use a PC to install a software update, or connect an
updated main unit to a remote or to another main unit to update
those units.
To use a PC to update the software
Caution
To prevent unexpected loss of power, connect the
ac adapter to the tester when you update the
software.
To Next Page
Loading...
