Flyability Elios 3 - LiDAR Errors

ELIOS 3 User Manual
I14
VIO calibration file error,
performance may be
diminished
Calibration error—stability performance may be diminished.
I15
VIO calibration SN mismatch,
performance may be
diminished
Calibration SN mismatch—stability performance may be diminished
LIDAR
Error
Code
MESSAGE
REQUIRED ACTION / EXPLANATION
L01
LiDAR system error
The LiDAR has a system error. Please restart the drone and contact
Flyability support if the problem persists.
L02
The LiDAR is too hot and
stopped working
LiDAR stopped working because it was too hot.
L03
LiDAR is getting hot
The LiDAR is too hot. We recommend you turn the drone off.
L04
The LiDAR is too hot.
Performance might be reduced
LiDAR is too hot—performance may be reduced.
L05
The LiDAR is too hot.
Performance is reduced.
Further heating will shut the
LiDAR down
LiDAR is too hot—performance is reduced.
TRANSMISSION
Error
Code
MESSAGE
REQUIRED ACTION / EXPLANATION
T01
Weak signal—fly closer
Weak radio signal—fly closer to the remote control to avoid losing
the connection.
SOFTWARE
MESSAGE
REQUIRED ACTION / EXPLANATION
ELIOS 3 User Guide
Page 81 of 94