147
EN
Test whether the seat post and the seat
are rmly attached before you drive off.
To do this, hold the seat at the front and
back and attempt to turn it. It should not
move.
Height of the handlebars
Once the seat has been rmly and comfortably
positioned, the handlebars must be adjusted to
your needs.
An effective starting position for relaxed riding is
offered by a seating position in which the upper
body and arm form a 90° angle.
In order to change the height of the handlebars,
the height of the stem must be adjusted.
Allow your FLYER specialist retailer to
adjust the settings of the handlebars and
the stem.
Speedlifter Twist
The Speedlifter allows you to adjust the height
of the handlebars in only a few movements. The
Twist system makes it possible to turn the handle-
bars 90 degrees to save space while transporting
your FLYER.
Open the quick release lever of the Speedlifter (1)
Move the handlebars to the desired position (2).
1
2
Close the quick release lever completely to fasten
the handlebars (3).
Open the quick release lever in order to turn the
handlebars sideways (1).
Lift the unlocking bolt (2).
The handlebars can now be turned sideways (3).
The bolt automatically latches in the 90-degree
positon (4). Completely close the quick release
lever so that the handlebars are safely fastened.
3
1
2
4
3
90°
To Next Page
Loading...
Need help?
General
