Chapter 2 Getting Started
Flyingvoice Network Technology Co., Ltd. 13
Chapter 2 Getting Started
This chapter describes the introductory operation of the P10(P) phone and covers the
For more information and help, please contact us.
Topic
Phone initialization
Phone Status
Basic network settings
Wireless network settings
2.1 Phone initialization
After the phone is powered on, the following steps will be performed.
1. the "FLYINGVOICE" logo is displayed on the LCD interface
2. When the phone is initialized, wait for the progress bar to finish loading.
3. After the phone starts normally, it can obtain network configuration through DHCP.
By default, the phone obtains network configuration such as IP address, subnet mask, default
gateway address and DNS server through DHCP server.
Note: If the phone cannot get the network configuration through DHCP server, please do the
basic network settings on page 20.
2.2 Phone Status
Procedure
You can press Menu, then press My Status to view the Network and Phone status.
The phone screen is shown below:
2.3 Basic network settings
If the phone cannot get the network configuration through DHCP server, you need to set it
manually.
To Next Page
Loading...