Chapter 3 Call Features
Flyingvoice Network Technology Co., Ltd. 26
Setting Up a Local Conference Call
Holding or Resuming a Conference Call
Splitting a Conference Call
Ending a Conference Call
Setting Up a Local Conference Call
You can set up a local conference call with up to five contacts.
Procedure
1. Place a call to the first party.
2. When the first party answers the call, select Conference (Conf) to place a new call.
The active call is placed on hold.
3.Dial the second party’s number.
You can also select the desired contact from the search list, or select a contact from the placed
call list or Directory before you enter the number.
4. Wait until the second party answers the call, press the Conference (Conf) key.
5. At this point, a three-person meeting was generated.
Holding or Resuming a Conference Call
When you place a conference call on hold, other participants cannot hear each other until
you resume the held conference call.
Procedure
1. Press Hold to place the conference on hold.
2. Press Resume to resume the held conference call.
Splitting a Conference Call
You can split the conference call into individual calls. After the split, the conference call ends,
and other parties are on hold. Press Resume to resume one of the held call or hang up.
Procedure
1. Select Split.
2. Press the navigation key up or down to select a held call.
3. Press Resume.
Ending a Conference Call
When you end the conference call, the other parties drop the call.
Procedure
1. Select End Call (End C).
To Next Page
Loading...