Program Program
Code Function Code Description Entry Code
38 Issue/Rev. 03 (8/97)
725-739 Unassigned at Present 725-739
740 Protection of Program Enter: "0" for Weights and Measures Mode 740
Codes 780-789 "1" for Program Mode __
741 Communication Link Enter: "0" for No Program Code Values 741
Programming "1" for Program Values Only
"2" for Program and Weights and
Measures Values
"3" for Alarm Reset Only __
742 Communications Enter: Three digits in seconds 742
Time-out that communication polling may
be absent (e.g., 060)
"000" disables the Communications
Alarm Mode __ __ __
743 Communications Enter: "0" Standby Mode 743
Alarm Mode "1" Communications Alarm Mode
"2" Standby and Communications
Alarm Mode __
744 Prompt Time-out Enter: Three digits in seconds 744
of time-out allowed with each
prompt (e.g., 015) __ __ __
Note: Minimum time-out is 10 seconds.
745 Prompt Data Entry #1 Enter: Two digits representing 745
the prompt data response.
First digit "0" = Displayed
First digit "1" = Hidden Display
Second digit "0 - 9" = Digits for
prompt entry (e.g., 04) __ __
746 Prompt Data Entry #2 Enter: Two digits representing 746
the prompt data response.
First digit "0" = Displayed
First digit "1" = Hidden Display
Second digit "0 - 9" = Digits for
prompt entry (e.g., 15) __ __
To Next Page
Loading...
